Chord Electronics - Ultima Pre 2 - Försteg

Ett referensförsteg med Chords senaste Ultimateknik. Här finns alla in och utgångar man kan önska, speciafikationer som få andra kan matcha, byggkvalitet i "stridsvagnsklass" och ett makalöst dynamisk och kristallklart ljud. Detta är Akkelis Audios referensförsteg, kom in och provlyssna. Inputs & Outputs: 8 Stereo Inputs and 1 Stereo Outputs 4x Stereo Balanced XLR Inputs – Line In 1, Line In 2, Line In 3, and Line In 4 4x Stereo Unbalanced RCA Inputs – Line In 5, Line In 6, Tape 1, Tape 2 1x Stereo Output – Either via Balanced XLR or Unbalanced RCA 2x Stereo Outputs – RCA unattenuated for recording loop 1x Stereo Balanced XLR AV Bypass Input Frequency Range: 2.5Hz – 200kHz +/- 3dB Total Harmonic Distortion: 0.002% 20Hz – 20kHz Intermodulation Distortion: -115dB on all inputs Signal to Noise Ratio: -120dB on all inputs Channel Separation: 20Hz @ 100dB, 1kHz @ 95dB, 10kHz @ 90dB, 20kHz @ 85dB Channel Balance: 0.01dB Input Max Voltage: 17v RMS Balanced – 8.5v RMS Unbalanced Output Max Voltage: 17v RMS Balanced – 8.5v RMS Unbalanced Output Offset: 0mV (Both Channels) Potentiometer Performance: 0dB 0.5dB, -20dB 0.2dB, -60dB 0.24dB (13seconds Full Travel) Nominal Gain: All inputs subject to six levels of switchable gain – x0.5, x1, x1.5, x2, x2.5, and x3 Input Impedance: 100 kΩ Balanced – 50 kΩ Unbalanced Output Impedance: 100Ω (Short Circuit Protected) Operating Voltage: 85v – 270v AC (50Hz – 60Hz) Auto Switching Power Consumption: 30w Dimensions Without Integra Legs: 420mm (w) x 355mm (d) x 133mm (h) Dimensions With Included Integra Legs: 480mm (w) x 355mm (d) x 173mm (h) Weight: 18kG