Von Schweikert VR-4SR Mk2 - Begagnade högtalare

Vi har bytt in ett par Von Schweikert VR-4SR Mk2, en tjusig och rejält välbyggd skapelse. Detta är en amerikansk highendhögtalare som spelar fullregister och med sin bakåtriktade diskant skapar ambiens och 3D. OBS!!!! Lådor saknas så högtalarna måste hämtas i butiken!!! Type: Dynamic-driver four-way system using a triple-chambered transmission line and two-piece stacking enclosure system to eliminate resonance and ensure image focus. Frequency Response: 20Hz to 25 kHz (+/-3dB) Impedance: 6 Ohms avg. (4 Ohms 20Hz to 150 Hz) Sensitivity: 92dB/W/m Driver Complement: Two 8.5-inch aluminum woofers from Norway, one 7-inch carbon Kevlar-cellulose Aerogel midrange driver from France, One 1.5-inch silk dual concentric ring tweeter from Denmark, and one 1-inch rear firing ambience mid/tweeter with fabric dome and transmission-line loading. All drivers use proprietary Advanced Motor System with low distortion design. Crossover: Acoustic fourth order, at 190 Hz and 1.9 kHz, optimized for flat off-axis response and phase consistency over a wide Global Axis. Parts are sourced from Hovland, Solen and others, internal wiring is by Analysis Plus. Woofer Tuning: Triple-chambered transmission line hybrid design composed of three separate chambers and tuned vent at 23Hz. Cabinet And Bracing: A 2-inch thick front baffle and one-inch MDF fiberboard interlocking braces. Internal damping consists of thick acoustic felt and foam lining with Dacron stuffing. Large carpet spikes are provided. Binding Posts: Double sets of five-way rhodium posts enabling bi-wiring. Single wire can be used with optional Data Link connector. Dimensions: Midrange/Tweeter is 14 x 11 x 24) and Woofer is 29 x 11 x 24. Overall system measures 44 x 11 x 24 (HxWxD). Weight: Woofer module: 97 lbs., M/T module: 53 lbs. Warranty: Ten years Parts and Labor, excluding burned voice coils due to amp clipping. Warranty is transferable to second owner. Finishes: Available in four book-matched wood veneers that include African Hazelwood and Dark Red Cherry. Sycamore and Ebony wood are also available as premium finish options. A satin-gloss polyester resin clear-coat protects the fine wood surfaces. Price: $12,000