Michell Engineering VTA Rega 3-point fixing/adjuster

Michells VTA Rega 3-point fixing/adjuster moderna (släta) Regaarmar. __________________________________ Our Rega 3-point fixing VTA (Vertical Tracking Angle) Arm Adjuster has been designed for the range of Rega arms (RB-251 and RB301) that use the recently introduced 3-point fixing. Once installed, the user can adjust the vertical tracking angle in minute increments without losing the rigid 3-point mounting so important to proper sound reproduction. The VTA adjustor, at its minimum setting, raises the tone arm by 2mm, which is the same as the thinnest setting on the moulded adjuster available from Rega. It comes packed with two different thickness adjuster rings (the thinner ring is designed to lift the tonearm base 0 to 2mm and the thicker ring will lift the base 2 to 4 mm) and all of the fixings necessary as well as a nylon nib to help rotate the base notches if access is tight.