Ortofon MC Windfeld Ti

MC Windfeld Ti – en Moving Coil-pickup i den absoluta high-end-klassen I hjärtat av MC Windfeld Ti finns en revolutionerande, specialanpassad tillverkningsteknik kallad selektiv lasersmältning (Selective Laser Melting), som Ortofon banade väg för vid tillverkningen av den legendariska MC A90 år 2008. Användningen av titan i MC Windfeld Ti har gett en ytterligare förbättring av strukturens övergripande styvhet och pickupens vikt. Vår omfattande kunskap om vibrationsegenskaper och karakteristika hos olika former och material, tillsammans med vår kompetens inom magnetism, mekanisk design och ny teknik, har tillämpats för att optimera MC Windfeld-modellen. MC Windfeld Ti har tagit prestandan till nästa nivå genom att reducera oönskade vibrationer och öka pickupens dynamiska förmåga. De som väljer att skaffa en MC Windfeld Ti kommer att få uppleva ett naturtroget, dynamiskt och öppet ljud med ett exceptionellt klart mellanregister. MC Windfeld Ti förblir extremt musikalisk samtidigt som den lägger stor vikt vid mikrodynamiska detaljer, tack vare sin finstämda men också analytiska karaktär. The mechanical integration of the MC Windfeld Ti Historically, Ortofon has always followed its own path with regard to the mechanical design of the cartridge housing, because mechanical rigidity and total freedom from resonance in the audible range are a precondition for optimal sound quality. In the MC Windfeld Ti the cartridge’s contact with the tonerarm takes place through three hard, well-defined contact points placed on the fastening section of the cartridge. This means that the mechanical integration of the cartridge and the tonearm arm are always absolutely perfect. Flexibility and performance with a range of compatibility With optimized weight and moderate compliance to suit the majority of modern tonearms, the MC Windfeld Ti is easy compatible with an endless array of contemporary high-end turntable equipment, including the Ortofon TA-210 and TA-110 tonearms. A low output impedance of 7 ohm and a medium output voltage of 0.2 mV makes the Ortofon MC Windfeld Ti a perfect partner for most MC pre-amps as well as step-up transformers, including the Ortofon ST-80 SE. When combined with Ortofon’s world-class knowledge in analogue sound reproduction, The MC Windfeld Ti will undoubtedly provide sound which is literally unsurpassed and simply has to be experienced. Technical data Output voltage at 1000 Hz, 5cm/sec. - 0.2 mV Channel balance at 1 kHz - 0.5 dB Channel separation at 1 kHz - 25 dB Channel separation at 15 kHz - 20 dB Frequency range at - 3dB - 10 Hz - 50 kHz Frequency response - 20 Hz - 20 kHz +2 dB/- 1 dB Tracking ability at 315Hz at recommended tracking force - 90 µm Compliance, dynamic, lateral - 13 µm/mN Stylus type - Special polished Nude Ortofon Replicant 100 on Boron Cantilever Stylus tip radius - r/R 5/100 µm Tracking force range - 2.0-2.5 g (20-25 mN) Tracking force, recommended - 2.3 g (23 mN) Tracking angle - 23° Internal impedance, DC resistance - 7 Ohm Recommended load impedance - > 10 Ohm Coil wire material - Aucurum Cartridge body material - SLM Titanium and Stainless Steel Cartridge colour - Titanium/Black Cartridge weight - 11 g